SSD 4-00 SAT twin end outlet 5…2200 MHz | CATV | SAT | SAT

  • Suitable for return path 5…65 MHz

  • With cover plate and frame



Bild CE.png Bild KlasseA.png Bild UltraHD.png Bild AND.png

Type SSD 4-00
Order no. SSD00400
GTIN 7611682180046
PE 1
VE 1
EU custom tariff number 85291095
Tap method Filter circuit/directional coupler
Trunk line
Frequenzy range input right 5…2200 MHz
Frequenzy range input left 5…2200 MHz
Isolation internal ≥ 20 dB
Suitable cables (Inner conductor | outer diameter) 0.63…1.13 mm | 4.70…7.35 mm
TV connector
Connector type IEC-male
Frequency range 125…862 MHz | 5…65MHz
Tap loss ≤ 2 dB | ≤ 2 dB
Radio connector
Connector type IEC-female
Frequency range 87.5…125 MHz
Tap loss ≤ 2 dB
SAT connector left
Connector type F-female
Frequency range 950…2200 MHz
Tap loss ≤ 2 dB
DC power pass to trunk yes
SAT connector right
Connector type F-female
Frequency range 5…2200 MHz
Tap loss ≤ 2 dB
DC power pass to trunk yes
General
Dimensions (W × H × D) appr. 78 × 78 × 46 mm
Weight 0.149 kg

Ask a question

Your email address will not be published. Required fields are marked *


  1. Rogge:

    Moin, welches Maß hat die Zentralabdeckung ? 50×50 ?

    Grüße aus Bremen

    • AXING:

      Die innere Abdeckplatte hat die Maße 55 x 55 mm.

  2. Asko Sorsa:

    Hello
    How can i connect
    satellite antenna cable to this antenna socket?
    does the cover need to be opened, how to do it?
    Send info how to connect satellite and also TV antenna cables
    best regards Asko

    • AXING:

      This TWIN wall socket is used for 2 coaxial cables, The 2 cables are led from a multiswitch (or LNB with multiple outputs) to the antenne socket and fixed there, as shown in this video.

    • Henrik Ailland:

      This TWIN wall socket is used for 2 coaxial cables from an multiswitch or LNB with multiple outputs. You will find a video here which shows how to connect a cable.

  3. D. Schmidt:

    Hallo,
    die Dose SSD 4-00 hat zwei Eingänge auf der Rückseite. Ist es egal welchen Eingang ich verwende um das Signal an der Front zu haben? Soll heißen wenn ich hinten rechts oder links den Eingang anschließe, habe ich auf der Front an allen Ausgängen das Signal, mit dem jeweils möglichen Frequenzbereich natürlich.
    Danke
    Mit freundlichem Gruß
    D. Schmidt

    • AXING:

      Die beiden SAT-Anschlüsse sind getrennt. Wenn also nur ein Koaxialkabel angeschlossen wird, ist ein SAT-Anschluss ohne Signalverbindung. Beim TV- und Radio-Anschluss ist es egal.

  4. Florian:

    Guten Tag,

    bisher kommen bei mir 2 lose Kabel aus der Wand: Ein Satellitenkabel und ein Radiokabel. Kann ich diese beiden direkt an diese Antennensteckdose anschließen, um eine “ordentliche” Lösung zu haben?

    • AXING:

      Es ginge mit einer Twinsteckdose SSD 7-00.

  5. John Preedy:

    No instructions came in the box. There are two terminals for satellite with screws to tighten them. I cannot see how to connect a tv aerial as well. Help please!

    • AXING:

      There is no manual available for this product. Because we sell such installation products to experienced installers, this is not provided. The socket can be surface-mounted or flush-mounted. For surface installation, cut the prepared openings in the frame on the desired side. For flush-mounted installation, the electrician usually uses a junction box or cavity wall box. The two coaxial cables which are delivering the satellite and terrestrial signal are stripped in 2 steps as for an F-connector installation. The inner conductor and the outer conductor are clamped by the screws. An optional antenna signal is fed in at the multi-switch or by combiner ( e.g. SWE 20-01 ), not directly to the wal outlet. The wall outlet separates the signals again.

  6. Alexander Kösters:

    Meine Frage lautet, kann ich mit dieser Anschlussdose Sat und Kabel TV anschließen, eine Sat und eine Kabel leitung liegt in der Dose drinnen.

    • AXING:

      Ja, das ist so möglich. Der erste SAT-Anschluss liefert dann aber kein Signal.