-
For up to 32 subscribers
-
Subscriber ports SAT active, terrestrial passive
-
Suitable for broadband return path (EoC suitable up to 204 MHz)
-
Receiver-fed multiswitch – no power supply necessary
-
Cascadable - Cascade outputs must be terminated with DC-isolated 75 Ohm terminating resistors (e.g. CFA 11-00, not included in the scope of delivery)
Type | SPU 532-06 |
---|---|
Order no. | SPU53206 |
GTIN | 7611682005370 |
PE | 1 |
VE | 1 |
EU custom tariff number | 85291095 |
Inputs | |
---|---|
Number | 5 |
Frequency range | 5…862 MHz | 950…2400 MHz |
Max. LNB current | 1500 mA |
Isolation V | H | >30 dB |
Isolation TERR | SAT | 30 dB |
Subscriber ports | |
Number | 32 |
Switch commands | 13/18 V, 0/22 kHz |
Tap loss TERR | 33 dB ±3 dB |
Tap loss SAT | 2...-1 dB ±2 dB |
Max. output level SAT (3rd order SAT EN 50083‑3 35dB KMA, 2 sender test method) | 102 dBµV |
Current consumption per port (without LNB supply) | < 35 mA |
Trunk outputs | |
Number | 5 |
Through loss TERR | 2 dB ±2 dB |
Through loss SAT | 2…6 dB ±2 dB |
Connectors | |
Connector type | F |
General | |
Equipotential bonding connection | 4 mm² |
Operating temperature range (acc. to EN 60065) | -20…+50°C |
Dimensions (W × H × D) appr. | 137 x 240 x 63 mm |
Weight | 0.750 kg |
IP code | IP20 |
Data sheet | Data sheet SPU 532-06.pdf |
---|---|
Operational instructions |
BA_SPU-5x-06.pdf
|
EU declaration of conformity |
CE/AXING-CE_SPU-532-06.pdf
|
Other documents |
AXING-INFO_SAT_EN.pdf
AXING-Flyer_QEW_EN.pdf |
9 April, 2023 um 10:24 Uhr
Wie lange darf eine Strecke zur Dose sein ohne dass ein Verstärker benötigt wird?
11 April, 2023 um 17:22 Uhr
Das hängt zum einen vom Empfangspegel, also Spiegeldurchmesser und LNB ab. Zum anderen von der Dämpfung vom Koaxialkabel und der Dose. Unter typischen Einsatzbedingungen sollten 30 m für SAT problemlos sein. Ein eingespeistes terrestrisches Signal muss zuvor verstärkt werden.