-
For SPU 5xx-09N SAT systems
-
4 × SAT 950 … 2200 MHz | Gain 14 … 20 dB
-
1 × CATV 5 … 694/862 MHz | Gain 20 dB
-
CATV selectable 694/862 MHz | active/passive
-
Attenuation SAT/CATV adjustable 0…15 dB
-
Equalization SAT fixed 6 dB
-
Equalization CATV adjustable 0 … 10 dB
-
Powered by ext. power supply SZU 99-09N (not included in delivery) or via the SAT-IF trunk lines
-
USB-C port for external power supply unit
| Type | SVS 550-09N |
|---|---|
| Order no. | SVS55009N |
| GTIN | 7611682400410 |
| PE | 1 |
| VE | 1 |
| EU custom tariff number | 85437030 |
| Inputs | |
|---|---|
| Number | 5 |
| Frequency range | 5 … 694/862 MHz | 950 … 2200 MHz |
| Attenuator adjustment range | 0 … 15 dB |
| Gain CATV | 20 dB ±2 dB (–6 dB PASSIVE) |
| Gain SAT | 14 … 20 dB ±2 dB |
| Equalization CATV adjustment range | 0 … 10 dB |
| Attenuator CATV adjustment range | 0 … 15 dB |
| Attenuator SAT adjustment range | 0 … 15 dB |
| Isolation SAT inputs | SAT inputs | 30 dB |
| Isolation CATV | SAT | 30 dB |
| Trunk outputs | |
| Number | 5 |
| Max. output level CATV (3rd order EN 50083‑3, 60 dB KMA) | 105 dBµV |
| Max. output level trunk SAT (3rd order EN 50083‑3, 35 dB KMA, 2 sender test method) | 110 dBµV |
| Isolation CATV | SAT | 30 dB |
| Isolation SAT | SAT | 30 dB |
| Connectors | |
| Connector type | F-female |
| General | |
| Operating temperature range (acc. to EN 60065) | –20 … +50°C |
| Operating voltage | 15 … 20 VDC* |
| Current consumption | max. 250 mA |
| Equipotential bonding connection | 4 mm² |
| Dimensions (W × H × D) appr. | 180 x 200 x 55 mm |
| Weight | 0.565 kg |
| IP code | IP20 |
| Comments | *USB-C power supply units must fulfil the Power Delivery (PD) standard and have an output voltage of 20 VDC |
| Data sheet | Data sheet SVS 550-09N.pdf |
|---|---|
| Operational instructions |
AXING-BA_SVS-550-09N.pdf
|
| Other documents |
AXING-Flyer_SVS55009N_en.pdf
AXING-Flyer_QEW_EN.pdf |
The SVS 550-09N amplifies SAT signals from one satellite position (LV, LH, HV, HH). In addition, CATV signals can be fed in and Ethernet-over-Coax signals can be transmitted via the CATV path. It can be used as a headamplifier or as an intermediate amplifier in a SAT system with SPU 5x-09N multiswitches. The SVS 550-09N is used to compensate for attenuation and slopes on long cable lengths between the LNB and multiswitch or antenna socket.
Ask a question