SPU 98-09S Multiswitch stand-alone/cascade unit | 9 in 8

For up to 8 subscribers
SAT active, CATV path active switchable and adjustable
Suitable for broadband return channel with passive CATV path (suitable for EoC up to 204 MHz)
With passive CATV path and Quattro LNB receiver-powered - no power supply unit required
With active CATV path or Quad LNB, power supply via external power supply unit SZU 99-09S (not included) or via the SAT IF trunk lines
Advanced standby and energy saving functionalities (e.g. only the required LNB is powered)
USB-C port for external power supply unit
Cascadable (unused cascade outputs must be terminated with DC-decoupled 75 Ohm terminating resistors (e.g. CFA 11-00, not included in the scope of delivery))

Inputs
Number	9
Frequency range	5 … 862 MHz \| 950 … 2200 MHz
Max. LNB current	2000 mA
Attenuator CATV adjustment range, switchable to passive	0 … 20 dB
Isolation V \| H	30 dB
Isolation CATV \| SAT	30 dB
Subscriber ports
Number	8
Switch commands	13V,18V,13V/22kHz,18V/22kHz, DiSEqC 2.0
Tap loss CATV active	0 dB
Tap loss CATV passive	28 dB
Tap loss SAT	3 … –2 dB ±2 dB
Max. output level SAT (3rd order SAT EN 50083‑3 35dB KMA, 2 sender test method)	100 dBµV
Max. output level CATV (3rd order, EN 50083‑3, 60 dB KMA)	90 dBuV
Current consumption per port (without LNB supply)	50 mA
Trunk outputs
Number	9
Max. output level CATV (3rd order EN 50083‑3, 60 dB KMA)	103 dBuV
Through loss CATV active	–23 dB
Through loss CATV passive	7 dB
Through loss SAT	3 dB
Connectors
Connector type	F-female
General
Operating temperature range (acc. to EN 60065)	–20 … +55° C
Operating voltage	15 … 20 VDC*
Equipotential bonding connection	4 mm²
Dimensions (W × H × D) appr.	230 x 178 x 65 mm
Weight	0.735 kg
IP code	IP20
Comments	*USB-C power supply units must fulfil the Power Delivery (PD) standard and have an output voltage of 20 VDC