SPU 58-09N Multiswitch stand-alone/cascade unit | 5 in 8

For up to 8 subscribers
SAT active and Quad LNB compatible
CATV path active switchable and adjustable
Suitable for broadband return channel with passive CATV path (suitable for EoC up to 204 MHz)
With passive CATV path and Quattro LNB receiver-powered - no power supply unit required
With active CATV path or Quad LNB, power supply via external power supply unit SZU 99-09N (not included) or via the SAT IF trunk lines
Contemporary standby and energy saving functionalities
Cascadable (unused cascade outputs must be terminated with DC-decoupled 75 Ohm terminating resistors (e.g. CFA 11-00, not included in the scope of delivery).

Inputs
Number	5
Frequency range	5 … 862 MHz \| 950 … 2200 MHz
Max. LNB current	2000 mA
Attenuator CATV adjustment range, switchable to passive	0 … 20 dB
Isolation V \| H	> 30 dB
Isolation CATV \| SAT	> 30 dB
Subscriber ports
Number	8
Switch commands	13V, 18V, 13V/22kHz, 18V/22kHz
Tap loss CATV active	–4 dB
Tap loss CATV passive	23 dB
Tap loss SAT	1 … –4 dB ±2 dB
Max. output level SAT (3rd order SAT EN 50083‑3 35dB KMA, 2 sender test method)	105 dBµV
Max. output level CATV (3rd order, EN 50083‑3, 60 dB KMA)	90 dBµV
Current consumption per port (without LNB supply)	50 mA
Trunk outputs
Number	5
Max. output level CATV (3rd order EN 50083‑3, 60 dB KMA)	105 dBµV
Through loss CATV active	–23 dB
Through loss CATV passive	5 dB
Through loss SAT	3 dB
Connectors
Connector type	F-female
General
Operating temperature range (acc. to EN 60065)	–20 … +55° C
Equipotential bonding connection	4 mm²
Dimensions (W × H × D) appr.	180 x 200 x 55 mm
Weight	0.555 kg
IP code	IP20
Comments	*USB-C power supply units must fulfil the Power Delivery (PD) standard and have an output voltage of 20 VDC

Data sheet	Data sheet SPU 58-09N.pdf
Operational instructions	AXING-BA_SPU-5xx-09N.pdf
Other documents	AXING-Flyer_SPU-5x-09N_en.pdf AXING-Flyer_QEW_EN.pdf

SPU 58-09N Multiswitch stand-alone/cascade unit | 5 in 8 | premium-line