-
Feeding IP signals into existing coax cable networks
-
For two RF cluster with max. 32 endpoints each
-
Data transmission range 5...204 MHz
-
Net data rate 2 × 1800 Mbps (PHY)
-
128 bit-AES-Encryption
-
Web interface for configuration
-
2 × 2 x RJ 45 Connectors for internet modem and configuration
-
19" housing, 1RU
-
Incl. build-in switching power supply
| Type | EOC 30-49 |
|---|---|
| Order no. | EOC03049 |
| GTIN | 7611682400335 |
| PE | 1 |
| VE | 1 |
| EU custom tariff number | 85176200 |
| Frequency range | 5 … 1800 MHz |
|---|---|
| Maximum allowed attenuation in coaxial network | 77 dB |
| Transmission level in coaxial network | 109 dBµV ± 1dB |
| EoC | |
| Standard | ITU-T G.9960 G.hn over Coax |
| Net data rate (PHY) | 1800 Mbps* |
| Encryption | AES 128 Bit |
| Max. number of devices in EoC network | 2 × 32 |
| Connectors | 2 × F-female |
| Interfaces | |
| Ethernet connectors | 4 × RJ 45 |
| Ethernet standards |
IEEE 802.3u 100BaseT Fast Ethernet IEEE 802.3ab 1000BaseT Gigabit Ethernet IEEE 802.3az Energy Efficiency Ethernet |
| General | |
| Operating temperature range | –10 °C … 55 °C |
| Operating humidity (non-condensing) | 10 … 95 % |
| Operating voltage | 100 … 240 VAC/50 … 60 Hz |
| Power consumption | 8.6 W |
| Dimensions (W × H × D) appr. | 480 × 47 × 270 mm |
| Weight | TBD |
| Comments | * The data rate indicates the data throughput between the EoC devices. For technical reasons, a maximum of 1000 Mbps is available at each Ethernet interface. |
| Data sheet | Data sheet EOC 30-49.pdf |
|---|---|
| Operational instructions |
AXING-BA_EOC-30-xx.pdf
|
| Current software |
EOC-30-xx_Software_v20250128.zip
|
| Other documents |
AXING-Flyer_EOC-30-x9_EN.pdf
|
Ask a question