To set up a mesh Wi-Fi, Wi-Fi repeaters from router manufacturers can be used, for example.
To set up a mesh Wi-Fi, Wi-Fi repeaters from router manufacturers can be used, for example.
A very high Internet speed can be achieved with a fibre optic connection – unfortunately often only up to the transfer point in the basement. In this application note, we show how EoC can be used to bring the Internet into living/work spaces.
To use Chromecast devices in the AXING Cast solution, they must be registered with Google Home and connected to the CAST WLAN. This is described as an example in this application note.
The network must fulfil various requirements. The hardware server must be integrated into the network accordingly. These requirements are described in this application note.
AXING Application Note FTTH or FFTB With the optical CATV transmitter, the optical 4-way upstream receiver, the optical de-/multiplexer and the micro fibre nodes, Axing offers a complete fibre optic transmission link for downstream and upstream. The fibre optic technology uses 1550 nm in the downstream and 1310 nm in the upstream. These components can […]
An EoC system is usually connected to the Internet to provide Internet access at multiple antenna sockets. This application note describes the connection to the Internet for a master endpoint system and a peer-to-peer system.
AXING Application Note To feed in the Ethernet-over-Coax signals, a TZU 40-05 EOC inserter is required. The G.hn connector of the EOC master is connected to input IN2 (EOC) using a coaxial cable with F connectors. The output of the headend is connected to input IN1. The COM output is connected to the house distribution. […]
Shows the possibilities to feed EoC into a CATV network.
IMPORTANT: The EOC masters EOC 30-01 and EOC 30-21 as well as the EOC endpoints EOC 30-02 and EOC 30-03 may only be used in a CATV network if the forward path frequency range starts at 258 MHz.
Shows the options for feeding EoC into the terrestrial input of a multiswitch.
If several headends work together in one system or if you manage several headends via the SMARTPortal, then meaningful device names make identification easier.